S32760 Grade Seamless Stainless Steel Pipe ASTM A789 For Processing
Equipment
Typical uses of S32760 tubing (A789 S32760) are in oil and gas
equipment, offshore technology, seawater desalination plants,
chemical industry, flue-gas cleaning, desalination plants and
seawater systems and pulp and paper industry. Other uses of these
tubes are in cargo tanks and tube systems in chemical tankers,
firewalls and blast walls on offshore platforms, bridges, storage
tanks, pressure vessels, reactor tanks and heat exchangers and
rotors, impellers and shafts.
1. Standards:
ASTM A789 Standard Specification for Seamless and Welded
Ferritic/Austenitic Stainless Steel Tubing for General Service
2. Application:
Chemical processing, transport and storage,
Oil and Gas exploration and processing equipment,
Marine and other high chloride environments,
Pulp and paper digesters, liquor tanks and paper machines.
3. Ordering Information
Quantity (feet, meters, or number of lengths),
Name of product (seamless or welded tubes)
Grade (S32760)
Size (outside diameter and average wall thickness, unless minimum
wall thickness is specified),
Length (specific or random)
Optional requirements (for product analysis; for hydrostatic or
nondestructive electric test),
Test report required
Special requirements
4. Chemical Requirements
| Chemical Composition |
| UNS Designation | C | Mn | P | S | Si | Ni | Cr | Mo | N | Cu | Others |
| S32760 | 0.05 | 1 | 0.03 | 0.01 | 1 | 6.0-8.0 | 24.0-26.0 | 3.0-4.0 | 0.20-0.30 | 0.50-1.00 | 0.50-1.00 |
5. Tensile and Hardness Requirements
| Tensile and Hardness Requirements |
| UNS Designation | Tensile Strength, min, ksi (Mpa) | Yield Strength, min, ksi (Mpa) | Elongation in 2 in. or 50mm, min, % | Hardness, max. |
| S32760 | 109 (750) | 80 (550) | 25 | 310 | 32 |
6. Available Size Range
OD | Thickness |
mm | inch | mm | SCH |
10.3~914 | 1/8’’~36’’ | 0.5~70 | All |
*If the steel grades and size you are looking for are not listed
above, please contact us for further information. |
