High Pressure Cold Drawn Steel Pipe , Cold Rolled Steel Tube P92
2'' 60.3mm OD
XIAN New Force is providing ASTM A335 P92 alloy steel seamless
pipes, which are mainly used for high-temperature service. P92 pipe
a kind of chrome moly pipes listed in ASTM A335, a standard in
power generation and petrochemical industry. TIPTOP supply a full
range of A335 chrome moly pipes.
In order to improve the heat efficiency of reheating steam pipeline
in power plant, the reheating-temperature can be designed as high
as 621°C, which is known as the super-critical temperature. The
Unite States firstly developed ASTM A335 P92 alloy steel in late
1980’s to meet the heat-resisting requirements of such a
high-temperature power unit. The alloy steel P92 is an improved
version of ASTM A335 P91 alloy which has deliberate addition of
tungsten, vanadium, niobium, decreased amount of molybdenum to
fine-tune to ferrite/austenite ratio, as well as carefully
controlled amount of boron and nitrogen.
1. Standards
ASME SA106 —— American Boiler and Pressure Vessel norms
ASME SA333 —— American Boiler and Pressure Vessel norms
ASME SA335 —— American Boiler and Pressure Vessel norms
DIN17175 —— German industry standards
EN10216-2 —— European pressure piping standards
2. Application
For the low and medium pressure boiler and steam header pipes; for
the high-pressure boiler and steam pipes, and the petrochemical
industry pipes.
3. Steel pipes No. of main production:
SA106B, SA106C, SA333 I, SA333 VI, SA335 P5, SA335 P11, SA335 P12,
SA335P22, SA335 P91, SA335 P92,
4. Size Available
3’’ ~ 6’’ (88.9mm~168.3mm)
5. Mechanical Properties
| Standards | Steel pipes No. | Tensile strength
(Mpa) | Bend strength
(Mpa) | Elongation
(%) | Impact energy
(J) | Hardness |
| ASME SA106 | SA106B | ≥415 | ≥240 | ≥22 | ≥35 | / |
| SA106C | ≥485 | ≥275 | ≥20 | ≥35 | / |
| ASME SA333 | SA333 I | ≥380 | ≥205 | ≥28 | －45≥18 | / |
| SA335 P11 | ASME SA335 | ≥415 | ≥205 | ≥22 | ≥35 | ≤163HB |
| SA335 P12 | ≥415 | ≥220 | ≥22 | ≥35 | ≤163HB |
| SA335 P22 | ≥415 | ≥205 | ≥22 | ≥35 | ≤163HB |
| SA335 P5 | ≥415 | ≥205 | ≥22 | ≥35 | ≤187HB |
| SA335 P91 | 585～760 | ≥415 | ≥20 | ≥35 | ≤250HB |
| SA335 P92 | ≥620 | ≥440 | ≥20 | ≥35 | 250HB |
| DIN17175 | ST45.8/III | 410～530 | ≥255 | ≥21 | ≥27(DVM) | / |
| 15Mo3 | 450～600 | ≥270 | ≥22 | ≥34(DVM) | / |
| 13CrMo44 | 440～590 | ≥290 | ≥22 | ≥34(DVM) | / |
| 10CrMo910 | 480～630 | ≥280 | ≥20 | ≥34(DVM) | / |
| EN10216-2 | 15NiCuMoNb5-6-4 (WB36) | 610～780 | ≥440 | ≥19 | ≥40 | / |
6. Chemical Composition:
| Standards | Steel pipes No. | Chemical composition(%) |
| C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V | Al | W | Cb | N |
| ASME SA106 | SA106B | 0.17~ 0.25 | ≥ 0.1 | 0.70~ 1.00 | ≤0.030 | ≤0.030 | | | | | | | | | |
| SA106C | 0.23~ 0.27 | ≥ 0.1 | 0.70~ 1.00 | ≤0.030 | ≤0.030 | | | | | | | | | |
| ASME SA333 | SA333 I | 0.09~ 0.12 | / | 0.7~ 1.00 | ≤0.020 | ≤0.010 | | | | | | | | | |
| SA333 VI | 0.09~ 0.12 | ≥ 0.1 | 0.9~ 1.10 | ≤0.020 | ≤0.010 | | | | | | | | | |
| ASME SA335 | SA335 P11 | 0.05~ 0.15 | 0.50~ 1.0 | 0.30~ 0.60 | ≤0.030 | ≤0.030 | 1.00~ 1.50 | 0.50~ 1.00 | | | | | | | |
| SA335 P12 | 0.05~ 0.15 | ≤0.50 | 0.30~ 0.61 | ≤0.030 | ≤0.030 | 0.80~ 1.25 | 0.44~ 0.65 | | | | | | | |
| SA335 P22 | 0.05~ 0.15 | ≤0.50 | 0.30~ 0.60 | ≤0.030 | ≤0.030 | 1.90~ 2.60 | 0.87~ 1.13 | | | | | | | |
| SA335 P5 | ≤0.15 | ≤0.50 | 0.30~ 0.60 | ≤0.025 | ≤0.025 | 4.00~ 6.00 | 0.45~ 0.65 | | | | | | | |
| SA335 P91 | 0.08~ 0.12 | 0.20~ 0.50 | 0.30~ 0.60 | ≤0.020 | ≤0.010 | 8.00~ 9.50 | 0.85~ 1.05 | | ≤ 0.40 | 0.18 ~0.25 | ≤ 0.015 | | 0.06~ 0.10 | 0.03~ 0.07 |
| SA335 P92 | 0.07~ 0.13 | ≤0.50 | 0.30~ 0.60 | ≤0.020 | ≤0.010 | 8.50~ 9.50 | 0.30~ 0.60 | | ≤ 0.40 | 0.15~ 0.25 | ≤ 0.015 | 1.50~ 2.00 | 0.04~ 0.09 | 0.03~ 0.07 |
| DIN 17175 | ST45.8/III | ≤0.21 | 0.10~ 0.35 | 0.40~ 1.20 | ≤0.040 | ≤0.040 | ≤0.30 | | | | | | | | |
| 15Mo3 | 0.12~ 0.20 | 0.10~ 0.35 | 0.40~ 0.80 | ≤0.035 | ≤0.035 | | 0.25~ 0.35 | | | | | | | |
| 13CrMo44 | 0.10~ 0.18 | 0.10~ 0.35 | 0.40~ 0.70 | ≤0.035 | ≤0.035 | 0.70~ 1.10 | 0.45~ 0.65 | | | | | | | |
| 10CrMo910 | 0.08~ 0.15 | ≤0.50 | 0.30~ 0.70 | ≤0.025 | ≤0.020 | 2.00~ 2.50 | 0.90~ 1.10 | ≤0.30 | ≤ 0.30 | | ≤ 0.015 | | | |
| EN1021 6-2 | 15NiCuMoNb5-6-4 (WB36) | ≤0.17 | 0.25~ 0.50 | 0.80~ 1.20 | ≤0.025 | ≤0.020 | ≤0.30 | 0.25~ 0.50 | 0.50~ 0.80 | 1.00~ 1.30 | | ≤0.05 | | 0.015~ 0.045 | |
